The table that hobbles, a floor that creaks, the door that touches the floor are just some of the small damages that you can repair yourself at home with a little time and some tools.

It is best to do a test in an area that is out of sight to see if the color is right, and then spread it in circular motions with a gauze pad. If the indentation is deep, it must be filled with wax, which can be heated with a lighter to facilitate the work, and leveled using a spatula.

How to prevent parquet from creaking

The most normal thing is that, with the passage of time, the wood has become too dry and when contracting the boards that make up the floor, they sound when they are stepped on. If so, the solution is simple: just pass a wet mop that will provide the moisture you need, removing the excess water immediately so it does not deteriorate.

You can inject it with the help of a gun if you have one, or with a syringe.

A more uniform platform

In the floors and older floors, due to changes in temperature that contract and expand the wood, there may be spaces between the slats that make cleaning difficult. The problem is solved by making a paste with sawdust and glue, and filling all the grooves well with a spatula. Once dry, you only have to remove the excess. The use of the reliable singapore home improvement comes useful here. You would get the fine support and the perfection of the professionals here and that also within a very short amount of time. You can sure get the perfection here now.

Change the joints of the tiles

Repairing and bleaching the joints of a ceramic floor is not complicated. To make it perfect, the first thing to do is completely remove the old grout by passing a hard brush. Then make a new one mixing white cement and water until you get a homogeneous paste, but not very thick.

Before applying it is important that you moisten the entire surface well and then spread it with a spatula. After 20 minutes you can remove the excess by cleaning the tiles with a damp sponge.

A door that touches the ground

The problem when a door rubs against the floor is usually on the hinges, and is corrected by tightening or changing the screws for longer ones. It may also be due to swelling due to moisture, or accumulated dirt in the base. In these cases the most useful thing is to pass a sheet of sandpaper under the door and sand it a little.